DYMO LabelWriter 450 Labels: Compatible Sizes and Rolls (2026)
Guides

DYMO LabelWriter 450 Labels: Compatible Sizes and Rolls (2026)

Every DYMO LabelWriter 450 label size in one table: address, shipping, FNSKU and file rolls, plus the third-party labels that fit and the ones that feed badly.

15 min read

Disclosure: Some links in this article are affiliate links. We may earn a commission on qualifying purchases at no extra cost to you.

The DYMO LabelWriter 450 runs on the same roll catalogue as the 550, but with one crucial difference: it has no chip reader. The 450 finds each label by sensing the gaps between them, so an older DYMO roll, a current chipped roll and a properly made third-party roll all load the same way. That single fact explains why a third-party listing that warns "not for the 550" usually works fine on a 450. If you are still weighing the hardware itself, our DYMO LabelWriter 450 review covers the printer; this page covers what goes into it.

The real constraint is width. The 450, 450 Turbo, 450 Twin Turbo and the label side of the 450 Duo print up to 2.25 in (56 mm) on media up to 2.44 in (62 mm) wide. Anything wider will not fit the feed path, and that is the whole reason standard 4x6 shipping labels belong to the 4XL and the 5XL rather than to a 450.

That leaves a smaller decision than the catalogue suggests. For most sellers the answer is three rolls: the 30252 for mailing addresses, the 30256 for parcel labels that carry up to six lines, and the 30334 for the small FNSKU barcodes that go on individual Amazon units.

As an Amazon Associate, we earn from qualifying purchases.

What Actually Limits a 450: Width and the Chip

DYMO's North America compatibility chart lists the same roughly 37 SKUs against the 450, 450 Turbo, 450 Twin Turbo, 450 Duo, 4XL, 550, 550 Turbo and 5XL. Two things break that apparent uniformity.

The first is width. In DYMO's technical specifications, every 450-family model except the 4XL shares one media path: 2.25 in (56 mm) of printable width on stock up to 2.44 in (62 mm) wide. The 4XL prints 4.16 in (105.73 mm) on media up to 4.53 in (115 mm). That gap decides which rolls exist for which machine, and it is why the 4x6 SKUs appear on the 4XL and 5XL lists only.

The second is the media tag. The 550, 550 Turbo and 5XL carry a chart footnote: "Only compatible with DYMO Authentic labels manufactured after April 2020." Those rolls carry the tag the 550 reads for Automatic Label Recognition, which reports label size, type and remaining count. The 450 has nothing to read that tag with. Chipped DYMO rolls work perfectly in a 450, because the same part numbers are listed for both families.

Two administrative notes that matter when you buy used hardware: DYMO's chart marks the 450 and 450 Turbo as discontinued, and the US DYMO store no longer lists any 450-family model or the 4XL. The software side is still current. DYMO Connect for Desktop v1.6.3 supports the 450 series and the 4XL on macOS 14 and later and Windows 10 and later; the legacy DYMO Label Software v8.7.5 covers macOS 10.14 to 13 and v8.7.4 covers Windows 7 to 11. Our 450 Twin Turbo driver and setup guide walks through the install if the printer is not yet talking to the machine. For the 550 side of the same catalogue, see the DYMO LabelWriter 550 label guide.

DYMO LabelWriter 450 Label Sizes: The Complete List

Every SKU below is listed for the 450, 450 Turbo, 450 Twin Turbo and 450 Duo (label side) unless the row says otherwise. All are direct thermal, so no ink, toner or ribbon is involved. The last two rows apply only to the 4XL within the 450 family.

Part # Size (in) Size (mm) Labels/roll Rolls/box Typical use
30251 1-1/8 x 3-1/2 28 x 89 130 2 Address
30252 1-1/8 x 3-1/2 28 x 89 350 2 Address (standard)
30320 1-1/8 x 3-1/2 28 x 89 260 2 Address
30340 1-1/8 x 3-1/2 28 x 89 50 1 Address (likely discontinued)
30254 1-1/8 x 3-1/2, clear 28 x 89 130 1 Clear address
30321 1-4/10 x 3-1/2 36 x 89 260 2 Large address
30256 2-5/16 x 4 59 x 102 300 1 Large shipping
1763982 2-5/16 x 4 59 x 102 250 1 Large shipping
1933088 2-5/16 x 4, durable 59 x 102 300 1 Durable shipping
30323 2-1/8 x 4 54 x 101 220 1 Shipping
1933087 2-5/16 x 7-1/2, durable 59 x 190 170 1 2x7 USPS format
30334 2-1/4 x 1-1/4 57 x 32 1,000 1 FNSKU and barcode
30336 1 x 2-1/8 25 x 54 500 1 Multi-purpose
1976411 1 x 2-1/8, durable 25 x 54 160 1 Durable multi-purpose
30324 2-1/8 x 2-3/4 54 x 70 320 1 Large multi-purpose
30332 1 x 1 25 x 25 750 1 Square
1933083 1 x 1, durable 25 x 25 850 2 Durable square
30333 1/2 x 1, two-up 13 x 25 1,000 1 Extra small
30330 3/4 x 2 19 x 51 500 1 Return address
30578 3/4 x 2 19 x 51 200 2 Return address
30327 9/16 x 3-7/16 14 x 87 130 2 File folder
1738595 3/4 x 2-1/2 19 x 64 450 1 File barcode
1933085 3/4 x 2-1/2, durable 19 x 64 450 2 Durable file barcode
30370 2 x 2-5/16, removable 51 x 59 250 1 Removable multi-purpose
30326 1-4/5 x 3-1/10 46 x 79 150 1 Video top
30347 1 x 1-1/2 25 x 38 750 1 Book spine
30373 15/16 x 7/8 24 x 22 400 1 Price tag
30299 3/8 x 3/4, two-up 10 x 19 1,500 1 Price tag (US only)
30270 2-1/4 in x 300 ft, continuous 57 mm x 91 m n/a 1 Non-adhesive continuous
30857 2-1/4 x 4 57 x 102 250 1 Name badge
30911 2-1/4 x 4, time-expiring 57 x 102 250 1 Time-expiring badge
1760756 2-1/4 x 4 57 x 102 250 1 Name badge
30856 2-7/16 x 4-3/16, non-adhesive 62 x 106 250 1 Badge card (widest 450 stock)
30374 2 x 3-1/2, non-adhesive 51 x 89 300 1 Appointment or business card
1933081 1 x 3-1/2, durable 25 x 89 350 2 Shelving
1933084 1-1/4 x 2-1/4, durable 32 x 57 800 1 Medium durable
1744907 4 x 6 104 x 159 220 1 4XL only
1933086 4 x 6, durable 104 x 159 200 1 4XL only

Two traps sit inside that table. The first is count: DYMO's 30252 product page displays size options for the 130-label roll alongside the 350-label roll, so check the roll count and not just the dimensions when you order. The second is the identical-size pairs. The 30256 and 1763982 are both 2-5/16 x 4 in, at 300 and 250 labels per roll; the 30330 and 30578 are both 3/4 x 2 in.

The Rolls Most Sellers Buy

The catalogue is large, but four jobs cover almost everything a small seller does.

Mailing and return addresses

The 30252 is the default address roll, at two rolls of 350 in a box. The 30321 is the same family in a wider 36 x 89 mm format that takes a four or five-line address, which is the practical reason to choose it over the 30252 when the return block is long. For the sender line, the 30330 covers 500 labels on a single roll in a 19 x 51 mm format, and the 30578 is the same footprint at a lower count.

Check the DYMO 30252 on Amazon · Check the DYMO 30321 on Amazon · Check the DYMO 30330 on Amazon

Parcel and shipping labels

The 30256 is the standard large shipping label for a 450: 2-5/16 x 4 in, 59 x 102 mm, 300 labels per roll, and DYMO describes it as printing up to six-line addresses. Note that DYMO's own product page for the 30256 lists it against the 5XL and 4XL, which contradicts the company's compatibility chart. The chart lists it for the 450 family, and at 59 mm it sits comfortably inside the 450's 62 mm media limit, so a 450 takes it.

The 30323 is the narrower alternative at 2-1/8 x 4 in (54 x 101 mm), 220 per roll, and suits smaller parcels. The 1933087 is a different job entirely: a durable 2-5/16 x 7-1/2 in (59 x 190 mm) roll that matches the 2x7 format Pirate Ship uses on a 450.

Check the DYMO 30256 on Amazon · Check the DYMO 30323 on Amazon · Check the DYMO 1933087 on Amazon

Product, barcode and FNSKU labels

The 30334 sits at 2-1/4 x 1-1/4 in (57 x 32 mm) with 1,000 labels on a roll, and DYMO's own listing names it for FBA and FNSKU barcodes. The 30336 at 1 x 2-1/8 in is the smaller barcode and price-tag option at 500 per roll, with the durable 1976411 as the same size in a tougher material. The 30332 square and the 30333 two-up are the small-format ends of the range, and both are where third-party stock causes the most feed trouble.

Check the DYMO 30334 on Amazon · Check the DYMO 30336 on Amazon · Check the DYMO 30332 on Amazon

Filing, badges and specialty stock

The 30327 file folder label at 14 x 87 mm and the 1738595 file barcode roll at 19 x 64 mm cover document workflows. For events, the 30857 name badge at 2-1/4 x 4 in comes in 250-label rolls, with 30911 as the time-expiring version. The 30856 non-adhesive badge card is the widest media a 450 takes, at 62 x 106 mm, exactly the printer's stated maximum media width.

Check the DYMO 30327 on Amazon · Check the DYMO 1738595 on Amazon · Check the DYMO 30857 on Amazon

Can a LabelWriter 450 Print 4x6 Shipping Labels?

No. A 4x6 label is more than 100 mm wide, and the 450's feed path stops at 62 mm. This is a physical limit, not a driver setting, and no paper-size configuration changes it. The two 4x6 SKUs in DYMO's chart, 1744907 at 220 labels per roll and the durable 1933086 at 200, are listed for the 4XL and 5XL only and are absent from every 450 list.

What that means by platform:

Label you are printing Required format Works on a 450?
Pirate Ship USPS (99019) 2 x 7 in, 59 x 190 mm Yes, USPS only
Pirate Ship UPS or international 4 x 6 in No, needs a 4XL
ShipStation 4 x 6 in No, ShipStation supports only the 4XL among DYMO printers
Amazon FNSKU per unit 2-1/4 x 1-1/4 in Yes
Amazon FBM or carrier parcel label 4 x 6 in No
UPS, FedEx, DHL, eBay, Shopify, Etsy parcel labels 4 x 6 in No

The Pirate Ship route is the one real shipping workflow a 450 handles as-is. Pirate Ship supports the LabelWriter 450 and 450 Turbo at the 2x7 size, on the 99019 paper size or any stock measuring 59 x 190 mm, and the constraints are firm: USPS only, and no customs forms, which rules out international shipments. On Windows the paper size is set under printing preferences, then Advanced, then the "99019 Large Lever Arch" or 59 x 190 mm option.

For the 2x7 format itself, the compatible paper comes from the same third-party makers as the rest of the range. Check the BETCKEY 99019 2x7 labels on Amazon.

For genuine 4x6 carrier labels, UPS or international shipping, the printer has to be a 4XL or a 5XL; for a ShipStation workflow, the 4XL. If that is where your volume is heading, our DYMO LabelWriter 4XL review and the 4x6 label printer buying guide cover the alternatives.

The 450 Duo: Label Rolls and D1 Tape Are Different

The 450 Duo is two printers in one enclosure, and the operating system sees it as two devices. The label side is a standard 450 mechanism: same paper rolls, same 2.25 in print width, same 300 dpi. The tape side is a separate thermal transfer mechanism at 180 dpi, with a maximum print width of 0.71 in (18.1 mm) and maximum media width of 0.95 in (24 mm).

That second mechanism takes D1 cassettes, not LabelWriter rolls. D1 is laminated plastic tape in a cartridge, available in 1/4 in, 3/8 in, 1/2 in, 3/4 in and 1 in widths, plus permanent polyester, flexible nylon and durable 1/2 in variants. A D1 cassette cannot go on the LabelWriter spool, and a paper roll cannot go in the cassette tray. Loading the tape is its own procedure: press the front button to open the tray, keep both the label and the ribbon taut across the cassette mouth, then close it.

If you run a lot of separate label types, the 450 Twin Turbo dual-roll model keeps two paper rolls loaded instead of one roll plus tape.

Third-Party Rolls for a 450: What Fits and What Fails

The 450 does not check what brand a roll is. It checks whether it can see the labels. DYMO's own user guide notes that competitors' perforated holes between labels "are frequently not detectable," which makes labels feed incorrectly. That is the whole compatibility test: the gap or the registration mark has to be something the sensor can see, and the roll has to physically match the spool.

A working buying checklist:

  • The listing names your printer's exact part number, not just "LabelWriter compatible."
  • The core is 1 in (25.4 mm), which is what BETCKEY and Aegis both specify on their 450-range rolls.
  • The stock is perforated with detectable gaps, or carries a black mark the sensor can read. LabTAG, for instance, lists notch and black-mark sensing on its EDY-series rolls for the 450 and 4XL.
  • The listing explicitly says it is not for the 550 or 5XL. That warning is a signal the seller understands the difference; BETCKEY, Aegis, LabelChoice and OmegaBrand all carry it.
  • You test one roll before buying a case.

Two failure modes are worth knowing before they cost you a printer. The first is end of roll: owners have reported the last label on a third-party roll sticking to the core and wrapping around the roller, which in one case meant taking the printer apart. Watch the final few labels rather than walking away from a batch. The second is small square stock, where label ends that are not flush with the backing catch in the feed.

Not every feed fault belongs to the label. Owners of the 450 Turbo have reported labels half-advancing on power-up with genuine 30334 rolls, the same fault they had first blamed on aftermarket stock. If a known-good roll misbehaves, check the printer, not the roll.

Storage matters as much as brand. DYMO puts label shelf life at around 18 months in the original packaging, and direct thermal print fades with sunlight, prolonged fluorescent exposure, heat and contact with plasticizers. Buying three years of rolls to save on shipping is a losing trade.

One purchase to avoid: the "RFID" third-party rolls sold for the 550. The 450 never reads that tag, so you are paying for hardware the printer ignores. For the wider picture on thermal media, our thermal label sizes and compatibility guide and the thermal label printer rolls guide cover how roll construction and sensing work across brands.

Frequently Asked Questions

Q: Can I use the same labels in a 450 and a 550?

Yes. DYMO's compatibility chart lists the same part numbers for both families, and the April 2020 footnote that requires authentic chipped labels applies to the 5-series only. A 450 owner who buys an "RFID" third-party roll pays a premium for a tag the printer has no reader for.

Q: Why do my compatible labels skip or feed wrong on the 450?

The 450 positions labels by sensing gaps and marks, not by reading anything on the roll. Check that the stock is perforated with consistent gaps or carries a black mark, reseat the roll so the spool guide sits flush with no gap, align the left edge with the feed slot, and set the label guide without pinching. If a correctly loaded known-good roll still misbehaves, the fault is in the printer.

Q: Does using third-party labels void the DYMO warranty?

Not outright. DYMO's warranty simply excludes malfunctions or damage that third-party labels cause. The printer is still covered for defects unrelated to the media.

Q: Can a 450 print UPS labels?

Not in the standard 4x6 format. UPS carrier labels are 4x6 in and the 450's media path stops at 62 mm. For UPS, or for any international shipment needing customs forms, the printer has to be a 4XL or a 5XL.

Conclusion

A LabelWriter 450 is simpler to feed than the catalogue makes it look. It reads no chips, so any correctly built roll in DYMO's chart works, whether it is genuine DYMO from 2015, DYMO from last year, or a third-party equivalent with the right core and detectable gaps. The one hard boundary is width: 62 mm of media, which leaves the 30256 and 30323 for parcels, the 1933087 for Pirate Ship's 2x7 USPS format, and hands genuine 4x6 carrier work to the 4XL.

For a typical seller the buy list is short. The 30252 covers addresses at two rolls of 350, the 30256 covers parcel labels up to six lines, and the 30334 covers FNSKU barcodes at 1,000 labels a roll. Filing, badges and the smaller product formats are there when a job calls for them, and the 30856 is worth remembering as the absolute widest stock a 450 accepts.

If you are still deciding which DYMO chassis to keep around, the complete DYMO printer brand guide maps the range by model, and the high-volume label printer guide covers what changes when daily label counts climb. For the packing-station side of the decision, see thermal label printers for shipping.

Check the DYMO 30252 on Amazon

Share:

Article Topics

#dymo labelwriter 450 labels#dymo 450 labels#labels for dymo labelwriter 450#dymo 30252#dymo 30256

You might also like